Ultrasonic Algae Control

Hydro BioScience, LLC Ultrasonic Algae Control Systems

Eliminate algae in pools, ponds, lakes, lagoons, reservoirs and tanks.

Wondering how to remove algae from your water without expensive toxic chemicals? Hydro BioScience, LLC is the answer.

How It Works

Hydro BioScience, LLC ultrasonic algae control systems eliminate your algae problems by using a technology that kills existing algae and controls future growth. The submerged ultrasonic transducer is programmed to generate the precise frequency of ultrasonic waves that destroys algae’s cellular functioning and structure.

Ultrasonic Algae Control UK

Depending on site conditions, initial results can be seen within two weeks of installation. Over a period of an additional 6 to 12 weeks, Hydro BioScience, will kill the algae that subsequently bloom from the algae spores that are present in the water. After 12 weeks, the device will continue to keep your water basin clear with 24-hour, low-cost, low-maintenance algae control. Hydro BioScience is completely chemical-free, can help lower pH and TSS.

How Hydro BioScience Ultrasonic Algae Control Device Kills and Controls Algae
The Hydro BioScience ultrasonic transducer for algae control, submerged just beneath the surface, is programmed to generate ultrasonic waves that inhibit the growth and spread of algae.

Easy to Install and Maintain

Sonic Algae Control Unit Placement
The Hydro BioScience Ultra-Sonic Algae Control device emits ultrasonic waves that “fan out” at approximately 180℉ from the front of the transducer (see Figure 1). The nutrient level, turbidity, shape of the body of water and the closeness to the equator may affect the coverage area. The potential coverage for the SS 400 model can be as much as 1.5 acres and for the SS 500 model up to 3 acres.

Set up your device to provide the optimal exposure of the ultrasonic waves to the body of water you are treating. Place close to the edge as sonic waves extend only in front of the transducer unit. Large installations and certain shapes of ponds or lakes may require installation of more than one device. Multiple devices can be installed at opposite sides of a lake or pond attached together pointing in different directions, depending on your site requirements.

The Hydro BioScience devices, like all ultrasonic devices, is a “line of sight” technology. Ultrasonic sound waves will not go around corners or navigate around islands that may be in your body of water, affecting the efficiency of algae control in ponds and lakes. In such circumstances, additional units are used to cover the “blind spots”. Ultrasonic sound waves reflect or bounce off hard surroundings, such as concrete, rip-rap, and large rocks (see Figure 3).

Frequently Asked Questions

1. How does Hydro BioScience work?
Hydro BioScience kills and controls algae in two ways:
a. Blue/green algae: Hydro BioScience hits the harmonic frequency of the gas vesicles (vacuoles) inside the blue/green algal cell and pops them. This causes the algal cell to sink to the bottom of the body of water. There, out of the direct sunlight, it cannot photosynthesize and it begins to starve and become weak. The bacteria at the bottom of the body of water then consume the blue/green algal cells.
b. Other algae: Hydro BioScience hits the harmonic frequencies of the chemical bond that adhere the cytoplasm to the cell walls. When this happens the cytoplasm inside the cell visibly contracts away from the cell walls. In this state the cell can neither consume any food nor get rid of any waste. The cell starves to death over time.

2. Does it have any effect upon fish or other aquatic wildlife?
The Hydro BioScience devices, used in koi ponds, fish farms and in aquaculture, produces a range of ultrasonic frequencies that target blue/green and filamentous algae. It is not effective on aquatic plants, such as duckweed, water meal, eelgrass, milfoil, and chara.

3. Will it kill duckweed, water meal, milfoil or cattails?
Hydro BioScience only kills and controls algae and has no effect on either beneficial or invasive species of aquatic plants.

4. How long does Hydro BioScience take to work?
Typically, you will start to see a significant change in the pond’s algae color (from green to brown) in 3 to 4 weeks, or less. In a water body with thick algae, and/or very high nutrient levels, a complete kill may take as long as 4 to 5 weeks. During this time, as the algae dies, it will turn brown and may remain floating on the surface or just sink to the bottom depending on the species. We recommend removing any dead brown algae floating on the water.

When the water appears clear after the initial algae kill, you may get a secondary algae bloom. This happens because sunlight can now reach the bottom, residual algae allowing spores to germinate. Do not be concerned. Leave your Hydro BioScience device in the water and it will kill and control the secondary bloom as well. This kill/bloom sequence may repeat two or three times as the “reservoir” of spores is exhausted. After that, the water should stay clear. Major rain events can sometimes reintroduce spores that will result in an algae bloom. Leave the Hydro BioScience device in place and it will kill subsequent blooms.

5. What size unit will I need?
There are different Hydro BioSciences models, each with different power levels. The unit size you will need depends upon:
a. the surface area of your pond or lake (in acres)
b. the amount of nutrients in the water, including those coming into the body of water from other sources
c. the shape of the body of water
d. the location of your water site in relation to the equator

Contact us for help determining the size and number of units required for your location.

6. Can I just buy one device and keep moving it around to other ponds?
To be effective, Hydro BioScience needs to operate 24 hours a day subjecting the algae to a constant bombardment of the ultrasonic signal. It is also essential that the entire water body is receiving the signal.

7. How expensive is it to operate?
Hydro BioScience is very inexpensive to operate because it only uses approximately 10 watts of power. That’s like running a small light bulb in your home.

8. What if there is no electricity at the pond?
Hydro BioSciences sells three 24-volt models that can be operated with the optional AWE Solar Power System. You can even tap into any golf course irrigation electricity if it operates on 24-volts (if it uses AC power, you will need a converter) and is continuously powered.

9. How can I tell if my transducer is working?
Look at the two green lights on the power supply box.
a. The solid green light indicates that the power supply is receiving electricity.
b. The blinking light indicates that the driver is sending power to the transducer to generate the ultrasonic waves.

Please don’t hesitate to contact us if you would like further information on Ultrasonic Algae Control UK  – Algae control without Chemicals.

Showing all 2 results